Model: SCJ -75k-55K+S2x1. 10D
Category: hollow blow molding machine, bottle blowing machine
Material proceed: PE, PP
Application: box ladle, hollow plate, tube, box, ball
Production capacity: 90kg/h(100kg/h)+30kg/h
Output: 10L bottle, 350g, 4,300 / day
Number of die head: 1
Screw diameter: main screw 75mm
Max. clamping distance of mould: 580mm
Min. clamping distance of mould: 230mm
Parison control system: Yes
After-sales service: one year
Processing customized: Yes
Advantages
1. Economical equipment, cost is not high, suitable for investment not much and initial industry customers.
2. Dual protection of unique locking frame: first, the guide rail has the valve value electronic components, and the second is that the mechanical limit block is provided at the end of the guide rail to prevent the lock arm from falling off.
3. Inside of the fine machining die, the flow path is free of dead Angle, and professional analysis software is used to measure the smoothness of the runner's runner, ensuring the smooth and fine flow of the two walls.
4. Optimize hydraulic oil circuit design, save electricity, quick action, convenient parameter adjustment.
5. Variable frequency speed adjustable extrusion motor can adapt to the change of screw rotation speed of blow molding process.
6. According to the product characteristics, different mould heads are set up for customer selection.
7. The K series USES the central oil cylinder structure of the back plate, and the locking force is strong and even
General features
1. It is suitable for plastic hollow products of PE, PP, EVA, ABS, K, TPU, nylon, etc.
2. The four-guide column balance pull rod structure, the lower bearing super hard adjustable guide column and the all-open template design, can hold the super long super wide mold.
3. Please choose the products next to you or go down to the following products to facilitate the production of different products.
4. Touch-screen interface, simple operation.
5. Design of duplex pumps: two hydraulic pumps in parallel oil supply, one hydraulic oil pump in high pressure, another hydraulic pump unloading characteristics.
Low power consumption and low power consumption.
6. Double proportional valve control oil flow velocity and pressure, control flow of reversing valve, brake valve brake, smooth and fast movement;
7. The central force design of the template, the locking force uniformly distributed;
8. CE standard safety design, focus on user safety;
9. The Japanese inverter adjusts the rotor speed and saves energy and energy.
10. Automatic lubrication system, reduce equipment maintenance work.
Units | Units | Specification | ||
Category | / | double layer single head | ||
Specification | ||||
Max. Blow Volume | L | 10 | ||
Material | / | PE,PP, | ||
No.Of Die Head | / | 1 | ||
Die Head Distance (Center to Center) | mm | / | ||
Net Weight | kg | 7000 | ||
Machine Dimension | mm L×H×W | 3930X2500X2200 | ||
Die Head | Die Head Heating Zone | / | 2 | |
Die Head Heating Power | kW | 7.5 | ||
Clamping Unit | No.Of Station | / | 2 | |
Min Clamping Distance Of Mold | mm | 230 | ||
Mold Stroke | mm | 350 | ||
Clamping Force | kN | 100 | ||
Extruder Unit | Extruder Diameter | mm | 75 | 55 |
Extruder Length/Diameter Ratio | L/D | 24 | 23 | |
Extruder Rotating Speed | r/min | 20-63 | 20-40 | |
Max Extrusion Capacity | kg/h | 95 | 30 | |
Extruder Motor Power | (kW) | 22 | 11 | |
Barrel Heating Zone | / | 3 | 3 | |
Barrel Heating Power | kW | 12.5 | 7.2 | |
Power Unit | Oil Pump Motor Power | kW | 11 | |
Hydraulic System Pressure | Mpa | 14 | ||
Pneumatic System Pressure | Mpa | 0.6-0.8 | ||
Cooling System Pressure | Mpa | 0.2-0.3 | ||
Air Consumption | m³/h | 5 | ||
Hot Cutter Power | kW | 2 | ||
Total Power | kW | 73.2 | ||
crusher recommend | hp | 10 | ||
Remarks | chiller recommend | hp | 8 | |
air Compressor recommend | hp | 10 | ||
Remarks: | All the machines above can be optionally equipped with 50 points parison control system,parameters would be changed as below: | |||
After with 100 points parison control | Model | / | SCJ 75-55K+S2×1.10D | |
Servo Motor Power | kW | 5.5 | ||
Total Power | kW | 78.7 |